• Imaging: 1-chip DLP®, Dark Chip

• Native resolution: WUXGA+ (1920 x 1200 - HD compatible)

• Illumination: Light Emitting Diodes (Red, Green, Blue)

• Pitch: 31.4 pixels per linear inch

• Gap: 1mm nominal gap between adjacent images/screens

• Types: wide angle cross prism

• Standard: Digital DVI-I with analog VGA

• Scan rates: Horizontal: 15-120kHz , Vertical: 23.97-150Hz , Pixel clock: 165 MHz

• Expansion: 3 input module slots available

• Optional modules: VGA, Digital (DVI), Analog (RGB), dual SDI/HDSI, twin HDMI

• Compatibility: compatible with Christie TVC Series video wall controllers or other input sources from VGA to QXGA as well as standard HD formats

• Technology: LED (RGB)

• LED life rating2: >60,000 hrs

• Temperature range: 3200-9300K

• Gamut: beyond 100% EBU

• Adjustment and control: Screen to Screen: ArrayLOC™ automatic brightness & color management

• Individual: Comprehensive Color Adjustment (CCA™)

• Lens types: 0.69:1 low distortion, zero offset, with field curvature correction

• Brightness uniformity: brightness uniformity control provides up to 100% uniformity capability for critical applications

• Contrast ratio: >100,000:1 (full field using shutter mode); 1400:1 (full field); up to 450:1 ANSI

Ports/controls:

• 2 RS-232 ports and 1 RS-422 port

• Field upgradable software via RS-232 network or Ethernet

• IR remote control

• GPIO port

• On-board ChristieNET™ connectivity (RJ45)

• Software: Christie KoRE™ 10-bit librarian communication software for field upgrade of firmware

• Inputs: see input option modules above

• Other: wired remote control, pedestal

Dimensions

• Depth: 33"

• See included line drawings for additional dimensions

Weight (approx.)

• Cube enclosure: 147lbs (67kg)

• Screen (XPS type): 81lbs (37kg)

• Light engine: 60lbs (27kg)

Shipping weight (approx.)

• Cube enclosure: 200lbs (97kg)

• Screen (XPS type): 119lbs (54kg)

• Light engine: 68lbs (31kg)

Stack-ability

• 3 units high (call if requirements is >3 high)

Service type

• Rear access

Cube

• Operating temperature3: 40-95°F (5-35°C)

• Non-operating temperature: -4-122°F (-20-50°C)

• Humidity: 20-80% non-condensing • Storage: 35-65% non-condensing

• Altitude: 0-3000m (0-10,000ft)

Screens

• Operating temperature3: 63-88°F (17-31°C)

• Non-operating temperature: -4-95°F (-20-35°C)

• Humidity: 40-60% non-condensing

• Altitude: 0-3000m (0-10,000ft) 

• Voltage: 100-240 VAC 50/60Hz

• Current: 4.8A

• Consumption: rating: 370W

• Dissipation (maximum): 1263 BTU/hr

MTBF

• >50,000 hrs MTBF for all major modules

MTTR

• <15 minutes with modular design • <5 minutes for lamp

• Directives: (EC) 2002/95/EC (RoHS)

• 2002/96/EC (WEEE)

• Regulation (EC) No. 1907/2006 (REACH)

• CAN/CSA C22.2 No. 60950-1

• UL 60950-1

• IEC 60950-1

• FCC, Part 15, Subpart B, Class A

• EN55022/CISPR22 Class A

• EN55024/CISPR24

• Certifications marks (check with Christie Digital Systems for latest update)

• cULus (Canada & US)

• CE (EU)

• CCC (China)

• GoST-R (Russia)

• KC (Korea)

• PSE (Japan)

• C-Tick (Australia & New Zealand)

• All projection units are factory calibrated for best color performance

• Two years parts and labor

Contact an authorized Christie representative for full details of our limited warranty