中文/EN
客服电话:+086 18612693323

巴可大屏配件耗材

巴可DLP大屏扩展箱(AGS-3335-0)

简介

AGS-3335-0和AGS-3335-1为巴可BARRCO大屏系列产品的OmniBus A18,是巴可大屏幕系统的重要核心配件之一,主要是为控制主机扩展板卡插槽,扩展箱A18底板上有18个PCI插槽,TransForm A OmniBus A18采用专有交换架构和智能高带宽背板,提供图形与视频数据集成所需的优化资源,带冗余、热更换关键组件实现系统总体高可靠性。

  • 说明
  • 性能
  • 规格
  • 图片
  • 资料下载
  •     每个OMNIBUS A18提供十八个PCI扩展插槽。可以用于插入UGX显示卡、OMNISCALER、四模拟视频卡、流视频卡、双RGB输入卡与四SDI视频卡等。

        尽管OMNIBUS A18的底板基于标准64 / 66MHz PCI总线,强烈推荐不要插入上述卡之外的其它卡。由于无驱动程序支持,其它卡将无法工作,同时还存在OMNIBUS A18或者插入卡损坏的风险。

        OMNIBUS A18的后面板上部分有不同的卡。根据TRANSFORM A的配置,左面为CPU板与连接接口板,随后是显示卡、OMNISCALER与输入卡。右下部为标准主电源连接与电源开关。根据TRANSFORM A的配置,左侧可以是冗余操作用的第二个电源模块的另一个主电源连接与电源开关。在标准主电源连接的左边,可以是等电位搭接导线连接

      Each OMNIBUS A18 offers 18 PCI extension slots. Can be used to insert UGX display card, OMNISCALER, four analog video card, stream video card, double RGB input card and four SDI video card.

       Although the base plate of OMNIBUS A18 is based on the standard 64-bit / 66 MHz PCI bus, it is highly recommended not to insert cards other than those mentioned above. Other cards will not work without driver support, and there is a risk of damage to the OMNIBUS A18 or the insert card.

      There are different cards on the back of the OMNIBUS A18. According to the TRANSFORM A configuration, the left side is the CPU board and connection interface board, followed by the display card, OMNISCALER and input card. The lower right part is the standard main power supply connection with the power switch. According to the TRANSFORM A configuration, the left side can be the second main power supply module for redundant operation connected with the power switch. On the left side of the standard main power supply connection, it can be an isoelectric tie wire connection


  • 采用专有交换架构智能高带宽背板,提供图形与视频数据集成所需的优化资源,带冗余、热更换关键组件实现系统总体高可靠性。

        • TransForm A OmniBus构成图形与视频子系统支柱

        • 设计为集成并显示各种数据信号源

        • 服务质量(QoS),分离图形数据与网络流和带宽要求高的输入数据

        • 交换架构和基于PCI 64/666.4 GB/s带宽容量,适用于大型系统

        • 非专有、标准PCI 64/66扩展卡接口确保兼容性


  • 尺寸(高/宽/厚) :           267mm / 449mm / 420mm

                                10.51 in. / 17.68 in. / 16.54 in.

    尺寸(高/宽/厚)含橡          胶脚垫、固定设备、把手:  270mm / 482mm / 461mm  | 10.63 in. / 18.98 in. / 18.15 in.

    重量/含冗余电源:           19.8 kg | 43.7lbs/.21.8 kg | 48.1lbs.

    主电源:                    100-240V,60Hz / 50Hz

    功率消耗:                  600 W

    工作条件摄氏:              0 .. 40°

    最大湿度:                  80%,非凝结